|
|
Post by douglas on Sept 5, 2007 12:45:18 GMT -6
I have one that goes 45mph and one that goes 35mph, they both are the same machine but one goes faster, anyone know what I can do to fix the other one that goes 35mph?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 5, 2007 14:14:33 GMT -6
No problem.......it's only a governer adjustment........or throttel cable..........fixed 123  |
|
|
|
Post by douglas on Sept 5, 2007 14:27:30 GMT -6
Faster is better  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 5, 2007 19:08:50 GMT -6
Sure is....as long as ya don't fall off and bump yer head.   |
|
|
|
Post by douglas on Sept 5, 2007 19:36:18 GMT -6
Roads er pretty bad around here as far as bumps, sure do hope the shocks last on those things |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 5, 2007 21:31:29 GMT -6
Oh.......fergot...........are we talkin 2 stroke or 4?
|
|
|
|
Post by douglas on Sept 5, 2007 21:41:18 GMT -6
It's a 2, heard that most scooter places put washers in the muffler to keep it at a low speed ( Restricker), problem is it's welded inside  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 6, 2007 11:08:13 GMT -6
Could have a restrictor.....don't know........but, i would still think you could adjust the throttle cable so it would open the slide on the carb more to give it more speed.
|
|
|
|
Post by douglas on Sept 6, 2007 12:56:44 GMT -6
Shes opened as far as she can go, might have to find anoder carb with a bigger opening |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 7, 2007 8:33:15 GMT -6
One of them big Holley's would do the trick. |
|
|
|
Post by douglas on Sept 7, 2007 18:38:13 GMT -6
The throat of the carb hose is about 2 inches and from the filter body it is only 1/2 inch so I widened it some and cleaned the air filter, too windy to ride it today, almost fell off of er |
|
|
|
Post by Rita on Sept 8, 2007 20:10:59 GMT -6
 Are ya sure thats why ??   I just seen one cranking at about 70 today ..  I coldn't believe it ... he must have some Mad Scooter skills !! My husband agrees about the Govener ajustment on the Carberator.. he says it just has to be..  Good luck!!
|
|
|
|
Post by douglas on Sept 10, 2007 5:15:25 GMT -6
I was able to get to the carb but couldn't phind any adjustments at all, did the throttle cable as far as it could go but nothing happened, maybe the carb is factory set to avoid changing er something |
|
I coldn't believe it ... he must have some Mad Scooter skills !!